Pole Configuration: Our security camera poles are predrilled. The drill pattern is shown on the specification sheet. A removable top cap or tenon is provided. The most common tenon option is a 2-3/8-inch diameter tenon; however, other options are available.
Pole Shaft and Height: 4-inch square 11-gauge commercial grade steel with minimum yield strength of 50,000 psi. Pole height is 25 ft.
Handhole: 3” X 5” size reinforced handhole is located at 18 inches from the base. A ground lug with set screw is located near the handhole opening for proper grounding of the pole.
Color: Dark Bronze.
Anchor Bolts: A set of 4 galvanized steel anchor bolts specifically designed for this light pole is required for each pole assembly. Each anchor bolt includes 2 nuts and 2 washers. The top portion of the anchor bolt is threaded for securing and leveling the pole with the provided nuts and washers. An actual size paper anchor bolt template is provided.
Bolt Circle: 8.5 inches (Bolt Circle Range: 8"-11")
Base Cover: Two-piece ABS plastic base cover is required for protecting pole base from elements.
Warranty: 1 Year.
Foundation design: Foundation should be designed by an engineer familiar with local soil and wind conditions as well as local code where the pole(s) will be installed.
- POLE HEIGHT:
- 25 Foot
- INSTALLATION TYPE:
- Anchor Base
- POLE SHAPE:
- Square
- WIDTH OR DIAMETER:
- 4 Inch
- GAUGE:
- 7 Gauge